ISO 9001 / ISO 14001 manufacturing support support@enclosuremetal.com
Industry applications

Metal Parts Manufacturer for Computer Hardware

Computer hardware buyers often need many small metal parts in one product family. HARVLAND reviews chassis, covers, I/O brackets, storage housings, heat spreaders and thermal shims from drawings, with attention to fit, flatness, finish and repeat supply.

Upload Industry Drawings All industries
DFM review before tooling decisions
ISO 9001 / ISO 14001 quality and environmental system support
No MOQ for sample validation
0.2mm-2.0mm target sheet metal range
Finish + inspection planned by project route
Application matrix

Part and product examples

Computer HardwareMini PC metal enclosuremini computer metal case / small form factor PC enclosure
Mini computer metal case with vented top and front I/O
Mini computer metal case rear I/O panel and small form factor PC enclosure
Small form factor PC enclosure with vented mini computer metal case
Silver mini computer metal case with vented top and front USB ports
Enclosures
Computer HardwareLaptop display metal bracketnotebook screen support bracket / laptop LCD metal bracket
Notebook screen support bracket exterior sheet metal panel
Laptop LCD metal bracket interior with mounting posts
Custom Metal Brackets
Computer HardwareGPU/NPU/TPU/FPGA cluster metal enclosureAI accelerator chassis / GPU server metal housing
AI accelerator chassis top view and GPU server metal housing
GPU server metal housing open chassis angle view
GPU NPU TPU FPGA cluster metal enclosure internal cutout layout
AI accelerator chassis sheet metal enclosure with internal standoffs
Closed front GPU server metal housing and AI accelerator chassis
EnclosuresOEM/ODM
Computer HardwarePower supply metal enclosurePSU metal case / power module sheet metal housing
Open-view PSU metal case and power module sheet metal housing
Side-view power supply metal enclosure with ventilation slots
Enclosures
Computer Hardware

Related capabilities

Enclosures Sheet Metal Enclosures Upload drawings for custom sheet metal enclosures so fit, mounting, ventilation, finish, installed hardware and assembly can be reviewed before production. HARVLAND supports housings, chassis, covers and equipment boxes from DFM and RFQ review through samples and repeat production. Electronic Components Electronic Stamped Components Review small metal parts used inside electronics: EMI shielding cans, heat spreaders, I/O brackets, contacts, covers, chassis parts and drawing-based hardware that must fit cleanly on assembly lines. Custom Metal Brackets Custom Metal Brackets HARVLAND makes drawing-based mounting, support, reinforcement and formed brackets for OEM assemblies. The review connects bracket geometry, stamping or fabrication route, material, hardware, finish and inspection before samples or production tooling. Stamping Parts Sheet Metal Stamping Parts Review brackets, shields, covers, clips, terminals, backplates and chassis parts in a typical 0.2–2.0 mm sheet range. Send drawings to compare stamping with fabrication and plan samples, tooling, finishing and repeat production. Custom Stamping Custom Metal Stamping Send drawings or samples for engineering review before tooling. HARVLAND helps OEM teams move from stamping feasibility and no-MOQ sample approval to finished mass production parts.
Resource library

Guides and articles

Thermal hardware DFM guideStamped Heat Spreaders, Thermal Plates and Shims: DFM and RFQ GuideA manufacturable heat spreader RFQ defines the part geometry, material, thickness, contact zones, flatness, finish, inspection and packaging without asking the metal part supplier to guess the complete thermal system. Use this guide to separate part-making requirements from system-level thermal validation.Design and RFQ guidePCB EMI/RF Shielding Can Design and RFQ GuideA shielding can is only one part of an EMC strategy. Use this guide to define its construction, board interface, material, finish, openings, edge condition, assembly route and validation plan before requesting tooling or production pricing.DFM and RFQ guideElectronic Stamped Components: DFM and RFQ GuideA useful electronic stamped components RFQ defines the part function, drawing revision, material, critical fit, burr direction, contact surfaces, finish, volume, sample approval and packaging before tooling or production is quoted.RFQ guideNetwork Switch Chassis, Server Chassis and Mini PC Enclosure RFQ GuideA useful chassis RFQ explains the equipment type, rack or mounting method, I/O openings, airflow path, finish, inserts and sample approval plan, not only the outside box size.
Industries

Other industry applications

network equipment metal enclosure manufacturer Network Communications Metal housings, chassis, brackets and EMI shields for CPE devices, network switches and optical transmission hardware. EMI shielding cover manufacturer PCBA and Electronics Small stamped metal shields, covers, contacts and brackets for board-level EMI control, grounding and assembly protection. battery energy storage enclosure manufacturer New Energy Sheet metal enclosures, battery pack hardware, busbar-style connectors and cooling fan blades for energy storage systems. audio visual metal parts manufacturer Audio Visual Stamped metal backplates, brackets, housings and shielding parts for displays, cameras, set-top boxes and audio equipment.
RFQ-ready capability

Have a part to quote?

Send drawings, material, thickness, finish and target quantity for review.

  • RFQ inputs Drawings, samples, material, finish, annual quantity and inspection notes.
  • Engineering review DFM, tolerance, burr direction, forming risk and tooling route.
Upload Drawing for Quote View Process
Upload drawing