Industry applications
Metal Parts Manufacturer for Network Communications
HARVLAND makes the metal parts used inside network and telecom equipment: enclosures, chassis, brackets, panels and EMI shielding. Send CPE router, switch or optical module drawings for DFM review, tooling route, finishing and production planning.
Application matrix
Part and product examples
Drawing requirements and sample approval
Align chassis, ports and grounding interfaces
Chassis and installation
- Specify in the drawing
- Dimension mounting holes, panel datums, cover interfaces and fastener access.
- Check with the sample
- Check chassis assembly, cover fit and alignment to the installation interface.
Ports and ventilation
- Specify in the drawing
- Show connector positions, cable access, PCB keep-outs and ventilation openings.
- Check with the sample
- Fit the mating board and connectors; check port and cable clearance.
Grounding and coating
- Specify in the drawing
- Mark conductive contact points, coating masks and visible-surface requirements.
- Check with the sample
- Inspect masked contacts and finish; define any electrical test and limits in the RFQ.
Use the network/server chassis and enclosure details for part-specific review. System cooling, shielding and ingress requirements need their own acceptance conditions.
DFM reviewbefore tooling decisions
±0.02 mm tolerancefor critical features, subject to drawing and process review
0.2–2.0 mmsheet thickness range
ISO 9001 / ISO 14001quality and environmental management systems
No MOQfor sample validation
Finish + inspectionplanned for your project
Contact us
Send the chassis drawing, PCB and connector envelope, mounting pattern, ventilation layout and grounding or masking requirements.