Industry applications
Metal Parts Manufacturer for PCBA and Electronics
PCBA and electronics projects need small metal parts that fit cleanly on assembly lines. HARVLAND reviews EMI shielding cans, RF shields, covers, contacts and brackets for burr control, grounding surfaces, finish compatibility and packaging before production.
Application matrix
Part and product examples
Potential products: industrial sensors, proximity switches, solenoid valves and small pump or brushless motors; suitability depends on the drawing and operating conditions.
Drawing requirements and sample approval
Separate shielding interfaces from sleeve fit
PCB shielding cans
- Specify in the drawing
- Dimension the footprint, solder or contact perimeter, cover height and component clearance.
- Check with the sample
- Check rim flatness, board fit and clearance around components and solder joints.
Open stainless steel sleeves
- Specify in the drawing
- Define bore, outside diameter, wall thickness, length and mating fit for the through-open sleeve.
- Check with the sample
- Check the agreed diameters, end condition and fit using the mating component.
Finish and handling
- Specify in the drawing
- Identify electrical contact areas, soldering requirements and packaging for delicate edges.
- Check with the sample
- Inspect contact surfaces and deformation after finishing and sample packing.
EMI attenuation and solder-process performance depend on the board, mating interfaces and test setup. Include those conditions if functional validation is required.
DFM reviewbefore tooling decisions
±0.02 mm tolerancefor critical features, subject to drawing and process review
0.2–2.0 mmsheet thickness range
ISO 9001 / ISO 14001quality and environmental management systems
No MOQfor sample validation
Finish + inspectionplanned for your project
Contact us
Send the PCB outline, component keep-out zones and shielding interfaces; for a sleeve, add mating diameters and required clearances.