Material and manufacturing
The main operations included laser cutting, press-brake bending and press riveting. A simple die was made to stamp the raised features on the enclosure. Surface finishing was outsourced. These operations were combined to manufacture this enclosure.
Sample inspection
After the samples were completed, full-dimensional inspection, trial assembly and visual inspection were carried out. Calipers were used for dimensional checks.
From the first batch to subsequent demand
The customer placed orders in batches, as shown below.
| Order | Month | Quantity | Current status |
|---|---|---|---|
| First order | August | 100 sets | Delivered |
| Second order | September | 300 sets | Delivered |
| Third order | October | 500 sets planned | Preparing to order |
Project delivery record
The recorded interval from sample confirmation to delivery for this project was 5 days.